Open Jobs at Aldelia Global Manpower Uganda
819 Days Ago
Linkedid Twitter Share on facebook
On behalf of our client in the oil and gas sector, Aldelia and HR Beyond Limits Limited is looking for competent individuals to fill the following position:
Job Position: Hole Cleaning Engineer
Department: Field Crew
Employment Status: Exlog Staff or Contractor, Full time
Role Summary
The Hole Cleaning Engineer is a key Representative at the Well-Site but also at the Client Office when he judges necessary to visit the Client as drilling operations have ended. The HC Engineer is one of the focal point between the unit deliverables and the client needs regarding his function (hole cleaning). The HC Engineer's scope of work requires in depth involvement from the predrill stage, but also the pre-visit (installation feasibility, scope of work), the commissioning of adapted tools and procedures to set on site, and through the well site operations phase. He is due to continue his job for assistance in post well analysis, as part of his Post-Drilling Report will be included in the client's "lessons learnt". The HC Engineer is due to visit the client any time to present results and observations, but also are nose or suggest changes in drilling client's "lessons learnt". The HC Engineer is due to visit the client any time to present results and observations, but also propose or suggest changes in drilling procedures to optimize performances and minimize cost.

Relationships
The HC Engineer is the permanent link between the Mud Logging Crew and the
Client at the well site. As his job encloses the whole Mud Logging Service, he is also in charge of the QA/QC of measurement chain and reports. He also stream information to the GEC for ultimate deliverables validation.
 

The HC Engineer is normally installed in the Service Companies Office at well site (preferably not in the Mud Logging unit). Together with the Company Man, the Rig Engineer and the Mud Engineer, he collaborates to real-time and post analysis for adapting drilling procedures. By assisting to the morning meetings on the rig site, he delivers daily results and observations on behaviour concerning hole cleaning in general, but also on the unit status (if no Units Manager is present on site).
The HC Engineer also functionally reports to his direct Operations Manager. Additionally the Data Engineers also have to exchange and share all necessary information (unit and equipment status, scheduled operations etc...) with the HC Engineer,

Responsibilities and Principal Duties Technical
• Maintaining the client relationship, satisfaction and confidence. The target is no formal client complaints.
• Being pro-active by providing any sensible observation which may lead by experience to an unsafe situation.
• Project preparation: link between Operations Manager, Unit Manager and Client Service Schedule preparation; definition of focus points arid deliverables with the client, propose standard reporting and log templates, including ways of delivery Job preparation coordination together with the Drilling Engineer. Rig Engineer and THEMA Engineer. Wel lsite Monitoring
• Service Schedule implementation and follow up: ensures that the deliverables produced are in line with the service schedule.
• Reports (Hole Cleaning Template (complete and tight follow-up of Cuttings Balance, CLEAR board, daily / phase tendencies (cuttings recovery cross-linked with T&D evolution, ECD monitoring and pills follow-up)) and logs delivery in town with emphasis on trend evolutions and noticeable events.
• Filter information and dispatch to experts after having debated with the Client.
• Real Time QAQC monitoring when required.
• Report QAQC. Collecting modifications request and ensures implementation when feasible and feed-back to GEC. HCM THEMA and related applications exploitation (data processing and analysis. POMOM munication of results to Drilling Engineer.
• Preparation of Torque & Drag models and implementation on site for Real time use.
• Dispatch of drilling procedures into the unit.
• Delivery of phase summary report and event report at the end of each sequence.
• End of Well Report progress (in line with client's requirements).
• Assistance to well site crew, preparation of next operation, identification of relevant applications to run and of report to produce. Link with base for efficient technical support.
• Reporting
• Determine with operations and well site management teams the standard and emergency reporting process and procedures.
• Manage the well database and ensure the quality and integrity of the well data annotating digital logs and records clearly and correctly and ensure confidentiality of any 'tight hole' requirements.
• Ensure the design of computer-generated logs meets required specifications.
• Submit accurate daily reports concerning geological and drilling parameters.
• Ensure the unit diary, spare parts inventory, equipment status reports, calibration reports and other specified equipment monitoring reports are kept up to date and available for audits.
• Perform or assist in correctly filling out of weekly, monthly, service activity and customer satisfaction reports and dispatch to Operations Manager by the first of the following month.
• Maintain regular contact with the Operations Manager to report the current work situation and remedy any potential or ongoing non-conformances.
• Prepare and submit the Final Well Report as per customer's specifications
• Properly organise, file and dispatch reports, trip sheets, dat3, charts and plots for later use by customer according to SDP.
• Specific Responsibilities The HC Engineer maintains the highest standard of professional conduct at the well site in concordance with Drilling Engineering Dept.
• The KC Engineer processes all enquiries for more/improved services. The HC Engineer proactively deals with any negative comments by identifying and correct problems and/or solve them if necessary.
• Previous Experience and Competencies Required Skills and Knowledge
• Strong customer service orientation
• Ability to manage detail and to see a broader big picture as well -- curious
• Ability to achieve a hierarchical organization of influent parameters in complex situation
• Ability to reach advanced analysis and still manage a part of instinctive approach
• Excellent interpersonal skills combined with a consultative and listening approach and the ability to present solutions or explanations to customer
• Proactive but also problem solving skills
• Understanding of basic functions of drilling mechanism and hydraulic purpose


Job Position: Base Technician
Job Group: Technical Support and Operations Integrity Employment Status: Exlog Staft, Full time :

Job Summary
The Base Technician is responsible for supervising Service Line support for technical matters and to ensure operational procedures are fully implemented and used by field crews and support staff in their geographic and service line area of responsibility. He/she acts as the level 1 support delivering safe, efficient and reliable equipment preparation, installation, de-installation, certification, repairs, maintenance and logistics as specified by the customer contracts; escalating when necessary technical support issues he/she is unable to deal with locally.

Relationships
The Base Technician
Reports directly to a Technical Support and Operations integrity Supervisor, in the absence of which, to a Service Line Operations Supervisor or Manager covering the Base Technician's geographic area of responsibility.
Is directly responsible to manage all Helpers assigned to them and to direct them in their daily planning and oversee their work.

Responsibilities and Principal Duties
General
• Adhere to company HSE rules when on company assignments.
• Actively promote the use of event reporting in accordance to OMS standards and procedures.
 

• Maintain a view of all event reporting related to his/her Service Line and geographic area and intervene when required on technical issues.
• Maintain a thorough understanding how to support his/her service Line (SL equipment logistics, storage installation, operation, maintenance, repairs, de-installation and technical resolution processes and technical documentation.
• Manage the quality control, maintenance and certification schedule of field equipment
• Ensure stock controls of inventory and spare parts at well site and in base will meet operational requirements and assist in managing the identification and movement of equipment - Perform site visits. Task Risk Assessment and pre and post-job technical evaluations to assess technical requirements and service delivery standards. - Review and report any non-conformance and follow up with necessary corrective actions.
• Assist or escalate equipment technical issues that cannot be resolved by field crews.
• Attend company, industry and client specific training courses as directed. - Use every opportunity to improve own knowledge of drilling formation evaluation techniques and Excellence Logging technologies (hardware and software ).
• Maintain a safe and efficient technical workshop or dedicated workspace in the Base.

Specific Responsibilities of Job
• Take proactive role in ensuring employee's adherence to the Operations Management System (OMS) Policies, Standards and Guidelines - Appendix
• Mentor field crew as required aligning them with Exlog's principles of service delivery.
• Other specific activities to be defined in agreement with management. Previous Experience and Competencies

• Education/Experience
• The selected person will ideally have a bachelor's or similar educational background with a minimum 10 years' experience in performing Field Services as Technician, - Preference is given to persons with relevant demonstrated knowledge and experience of resolving technical issues and equipment installation eg Data
• Experience with Exlog ANAX and XVIEW system is mandatory.
• Knowledge and Ability
• Minimum competence of Mud Logging techniques as Data Engineer Level 1 or Mud Logger Level 3.
• Demonstrated ability to work in a complex and fast paced environment
• Strong awareness of the regulatory directives for material handling, logistics and installation within his/her geographic area or where to source that information.
• Effective grasp of all OMS standards, processes and procedures

 Certification
• All Corporate Ethics, Code of Conduct, Trade and relevant compliance certification as outlined in Group Training - Offshore medical and survival training as required in the geographic area of responsibility 1
• Technical Support Certification Level 1 (under definition) Matrix. Exlog Anax system and Xview Expert. - Other specific to be defined according to the assignment
• Work Environment & Physical Demands Well site and technical preparation work will involve physically severe stretching and physical manual handling or lifting activities.
• Technical Support will require on-duty or extended availability out suplure working hours in order to accept calls to organise appropriate responses. - Short term notice availability in order to react to providing support with possible overseas travel required
• Behavioural Performance - Act as a technical specialist to help drive company standards, policies and procedures.
• Organisational discipline to plan and execute a high volume of varied tasks whist maintaining a holistic view of processes and current status of service delivery in their geographic area.
• Respect of the Code of Conduct to maintain our professional reputation and a responsible attitude and appearance in relations with the customer and well site personnel. Aci as a leader to field staff in this respect.
• Maintain a professional attitude to our customers and cooperation to our colleagues even in the face of adversity or operational constraints. - Remain proactive through conversations with the customer and field personnel to look for operational solutions taking every opportunity to improve field crew knowledge and skills.
• Strength of character to ensure influence on the rigour and methodology of our field personnel is applied to the techniques of delivering our services.
• Committed to deliver the best in service by enjoying your work and engaging with customers and teams with active and positive communication and responsible for maintaining the image of the Company. Do not let internal problems interfere with service to the Client. 1- Show a passion for our industry through self-learning and sharing of experience and knowledge with colleagues.
• The Base Technician will support operational strategies by applying and reinforcing the field crew and support staff commitment to and the awareness of Excellence Logging Operations Management System (OMS) and all policies, standards, guidelines, instructions, forms, reference documents and training material contained therein.


Job Position: Data Engineer
Department: Field Grew
Employment Status: Exlog Statf or Contractor, Full time

Role Summary
The Data Engineer's role is to ensure all Mud logging geological and surface drilling data are accurately measured and recorded at the wellsite. He/She acts as the focal point for drilling services cre 7 and client personnel; advising them of any operational event that has a direct effect on drilling or work-over operations. The Data Engineer monitors, evaluates activities and immediately reports unexpected well behaviour to minimise operational risks and environmental damage. He/She provides data interpretation and quantitative & qualitative real time services using muu logging data.
Relationships
• Data Engineers report to their Operations Manager, collaborating with client representatives and taking direction from them relative to client's operational requirements.
• The Mud Logger reports hierarchically to a Data i Engineer.
Responsibilities and Principal Duties.
General
• For continual, 24hr coverage, the mud logging unit must always be occupied and fully operational. For acceptable breaks, of short duration, emergency repairs, meals etc. the customer must be aware of and have agreed to a nominal routine when a unit may have reduced crew present.
• Job requirements are identified and communicated by the Operations Manager according to the Excellence Logging approved Service Delivery Plans (SDP). This includes both customer and regulatory requirements, operational conformity checks and customer satisfaction. Pre job briefing management during briefings and through daily pre job task risk assessments (TRA).
 

• State of Requirements (SOR) for Mud Logging operations is identified and communicated by the client's representatives
• Geological Monitoring
• Validate the mud log produced by the Mud logger is Comprehensive.
• Use industry and client provided gas interpretation methods to evaluate the quality of reservoir and source rocks.
• Cross check Mud Logging data with seirmic data, lagged LWD data or post drilling open hole logging data.
• Perform gas sampling as required and monitor lag. time and validate corrections
• Well site Monitoring
• Accurately measure and record all drilling and static operations including hole enlarging, reaming cementing, casing, bit or wiper trips, logging operations.
• Perform close monitoring of gas levels, lag time, drilling fluids and drilling parameters and report any anticipated or observed anomalies to the appropriate persons for immediate action or for closer surveillance identify and report immediately all drilling hazards like kicks, well ballooning, stuck pipe, lost circulation, shallow water flows, mud losses, drilling breaks, etc.
 

• Perform optimization diagnostics on mechanical drilling parameters, well hydraulics to improve drilling efficiency and reduce catastrophic failure.
• Cross check theoretical and actual mud returns correspond to expected well behaviour or surface activities.
• Check depth, drilling and logged data against a recorded data.
• Confirm or adjust the formation pore pressure gradient estimates by analysing the Dxc along with other qualitative mud logging parameters like gas, flowline temperature, caving's etc. obtained during drilling. Confirm or adjust estimates of formation fracture gradient from well planning against values obtained during leak-off or well integrity tests.
• Assist well site personnel determine the mud densities required for primary and secondary we control. Ensure primary well control by anticipating pressure imbalances.
• Reporting
• Determine with operations and well site management teams the standard and emergency reporting process and procedures.
• Manage the well database and ensure the quality and integrity of the well data annotating digital logs and records clearly and correctly and ensure confidentiality of any right hole requirements. Ensure the design of computer-generated logs meets required specifications.
• Submit accurate daily reports concerning geological and drilling parameters.
• Ensure the unit diary, spare parts inventory, equipment status reports, calibration reports and other specified equipment monitoring reports are kept up to date and available for audits.
• Perform or assist in correctly filling out of weekly monthly, service activity and customer satisfaction reports and dispatch to Operations Manager by the first of the following month.
• Maintain regular contact with the Operations Manager to report the current work situation and remedy any potential or ongoing non-conformances.
• Prepare and submit the Final Well Report as per customer's specifications
• Properly organise, file and dispatch reports trip sheets, data, charts and plots for later use by customer according to SDP
• Equipment
• Perform and supervise rig-up and rig-down in a safe manner of the ML unit and all ML, equipment conforming to the scope of work as directed by Operations Management
• Responsible for maintaining adequate equipment stock inventory/consumables including calibration and operating gases and hydrogen supply verifying validity dates and specifications
• Maintain and service all equipment and sensors according to Standard Work instructions (SW)
• Escalate to technical support items or services that cannot be put into service with a detailed report submitted to Operations Management or their support team.
• Perform or supervise regular calibration checks, maintenance and necessary repairs on all equipment, particularly gas instruments to ensure correct functioning of data acquisition systems.
• Propose to Operations Management innovative ideas for improvement of techniques or equipment used in the mud logging process.
• Ensure customers are aware of services / techniques available to improve their operations.

Previous Experience and Competencies
Education/Experience

• Ideally a technical or Bachelor education level. Preference is given to persons with an undergraduate degree in Engineering or an Earth Science or have the relevant knowledge or experience to perform the job. Preference is giver to candidates who have worked with a minimum 7 years' experience in performing Field services as Data Engineers.
• Experience with all advanced mud logging equipment, sensors, hardware and software.
• Exlog Anax and Xview system experience is mandatory.
• Certification
• All Corporate Ethics, Code of Conduct, Trade and relevant compliance certification as outlined in: Group Training Matrix.
• Job Skills/ Competency Certification for DE Competency o Job Skills/ Competency
• Certification for Senior DE Competency Job Skills/ Competency Certification for Advanced DE Competency
• IFP certification is mandatory.
• The Data Engineer will ensure commitment to and the awareness of Excellence logging business strategies and relevant group directives compliant with Operations Management System (OMS) and all policies, standards, guidelines, instructions, forms, reference documents and training material contained therein. They are responsible for performing Local Risk Assessments to ensure hazardous operations are minimized or controlled and Mud Logging Crew are aware of safety regulations and procedures at the well site and during travel to and from the well site. Ensuring all safety equipment in the mud logging unit is kept in good condition and safety records are maintained for and its purposes

Job Position: Mud Logger
Department: COAP - Field Crew Employment Status: Exlog Statt or Contractor, Full time

Role Summary
The Mud Logger's role is to provide the principal geological surveillance service for well site drilling operations. He / She provides the customer with a detailed analysis, interpretation and record of the rock cuttings and oil & gas shows. In the absence of a Data Engineer the Mud Logger is the focal point for communication with other service company employees, drilling contractor crew and the Client; appraising and company employees, drilling contractor crew and the Client; appraising and advising them of any operational event that may affect drilling or work-over operations. He / She monitors drilling activities and unexpected well behaviour to report and minimize operational risks and environmental damage.

Relationships
The Mud Logger supervises, if present, the Sample Catcher or Trainee Mud Logger.
The Mud Logger reports to, if present, the Data Engineer and functionally to an Exlog Wellsite Geologist. in the absence of either to the Exlog Operations Manager
 

The Mud Logger collaborates with customer representatives and takes directions from them relative to customer specific contracted services.

Responsibilities and Principal Duties General
• For continual. 24hr coverage, the mud logging unit must always be occupied and fully operational. For acceptable breaks, of short duration, including sample catching. emergency repairs, meals etc. the customer must be aware of and have agrees to a nominal routine when a unit may be unmanned
• Tasks are assigned according to the Company approved Service Delivery Plans (SDP). This includes customer and regulatory requirements; operational conformity checks and levels of satisfaction.
• Job and drilling program information for well site operations, are identified and communicated by the Operations Manager or customer during briefings, de-briefings and daily pre-job task risk assessments. Geological Monitoring (as per requirements)
 

• Perform or supervise the collection of cuttings samples, from the proper lagged depths. and at the proper intervals as required for evaluation.
• Perform or supervise the washing and screening of samples, the correct apportioning of reliably labelled geological samples and packing by sets for the customer, partners and trade
• Perform or supervise core catching, handling and analysis, as per the instructions of customer.
• Examine. describe and record samples as per industry standards and Customer specifications.
• Make detailed measurements, analysis, interpretation and records of the geology and oil and gas shows, serison measurements.
• Ensure that the mud log is accurate and comprehensive.
• Annotate digital logs clearly and correctly. Well site Monitoring (when required)
• Perform or assist in the close monitoring and validation of gas levels. lag time, drilling mud and drilling parameters, reporting any anomalies to the appropriate persons for immediate action or closer surveillance.
• Perform gas sampling as required.
• Monitor of tripping and casing operations and cross check theoretical and actual mud returns correspond to expected well behaviour.
• Reporting Determine, with custonier representative and Operations Management reporting and emergency reporting procedures.
• Be aware of and ensure confidentiality and any 'tight hole' requirements. . Submit accurate daily reports concerning geological and drilling parameters and the relevant section of the mud log.
• Prepare and submit a geological summary in the Final Well Report.
• Ensure that the unit diary, Spare pants and consumable inventories equipment status reports, Calibration reports and other specified equipment monitoring reports are kept up to date.
• Perform or assist in correctly filling out of weekly, monthly, service activity; and customer satisfaction reports and dispatch to Operations Manager by the first of the following month.
• Maintain regular contact with the Operations Manager to report the current work situation and remedy any potential or ongoing non conformances.
• Properly organise and file reports, charts, data and plots for later use by the Customer.
• Maintain personal competence records.
• Ensure performance evaluations and verify competence levels of all personnel under your control. Equipment (when required)
• Perform or supervise the regular and frequent calibration checks of gas and monitoring instruments. Assist or perform normal maintenance and necessary repairs on all equipment, particularly gas instruments, hook height, WOH, pit level, H2S and mud flow sensors. Report breakdowns immediately to the appropriate persons,
• Assist or perform normal maintenance and necessary repairs on all equipment
• Maintaining sensor calibration records availability for audits. . Propose to Operations Management innovative ideas for improvement of techniques or equipment used in the
• Propose to Operations Management innovative ideas for improvement of techniques or equipment used in the mud logging process.
• Ensure customers are aware of potential services / techniques available! to improve their operations.
• Assist or perform Rig-Up and Rig Down the unit and all equipment as required, conforming to the scope of work. Ensure all installations are: performed in a safe manner.

Specific Responsibilities of Job
• Operations Management System (OMS) I requirements for all policies, Standards and Guidelines. See Appendix 1
• Other specific activities defined by an assignment and recorded in job; briefing notes
• The Mud Logger is also responsible for a Trainee Mud Logger on-the-job training as hired
• Previous Experience and Competencies Education/Experience
• Ideally a technical or Bachelor education level. Preference is given to persons with an undergraduate degree in Engineering or in Earth Science or have the relevant knowledge of experience to perform the job. Preference is given to candidates who have worked with a minimum 5 years' experience in performing Field services as Mud Logger.
• Experience to work with Exlog ANAX and XVIEW system is Mandatory. Knowledge and Ability
• Demonstrated ability to work in a complex fast paced environment
• Have a proven hands-on attitude, be agile and adaptable . Good communication skills
• Have a proven hands-on attitude, be agile and adaptable . Good communication skills
• Thorough grasp of basic petroleum geology and excellent couter skills.
• Experience with Excel :: Logging equipment
Certification
• All Corporate Ethics, Code of Conduct, Trade and relevant compliance certification as outlined in: Group Certification Matrix.
• Job Skilis/ Competency Training Programme for Mud Logger Competency
• Job Skills! Competency Training Programme for Senior ML Competency
• Job Skills/ Competency Training Programme for Advanced ML Competency
• All current country and client regulatory certification, ie Work permits. offshore passes All current employment certification le travel docuinentation and medical certificates, vaccinations
• Other specific to be defined according to the assignment.ie Client certification. I client systems, client systems, FP certification is mandatory Work Environment & Physical Demands Rig site rotation schedules and call out /spot assignments - 24 hour a day service, typically 12-hour shifts and occasionally 24hr cover • Availability to attend company and industry training courses during rotational leave . Often involving physical severe stretching and manual handling and lifting activities . Relevant Local and international medical certification and screening and regulatory obligations / controls
• The Mud Logger must commit to and demonstrate knowledge of Excellence Logging business strategies and relevant group directives compliant with
• The Mud Logger must commit to and dernonstrate knowledge of Excellence Logging business strategies and relevant group directives compliant with Operations Management System (OMS) and all policies, standards, guidelines, instructions, forms, reference documents and training material contained therein:
Job Info
Job Category: Several Jobs in one Advert jobs in Uganda
Job Type: Full-time
Deadline of this Job: 30 September 2022
Duty Station: Kampala
Posted: 26-08-2022
No of Jobs: 4
Start Publishing: 26-08-2022
Stop Publishing (Put date of 2030): 26-08-2065
Apply Now
Notification Board

Join a Focused Community on job search to uncover both advertised and non-advertised jobs that you may not be aware of. A jobs WhatsApp Group Community can ensure that you know the opportunities happening around you and a jobs Facebook Group Community provides an opportunity to discuss with employers who need to fill urgent position. Click the links to join. You can view previously sent Email Alerts here incase you missed them and Subscribe so that you never miss out.

Caution: Never Pay Money in a Recruitment Process.

Some smart scams can trick you into paying for Psychometric Tests.